Metal cutting is a popular service that requires not only skill, but sometimes expensive equipment. Neolat offers several types of cutting: plasma, autogenous thermal and laser. Each of the methods is applied in certain conditions, depending on the needs of the client.
Plasma cutting
Through the use of a plasma jet, the temperature of which reaches 20,000 ° C, it is possible to produce cutting at a speed of about 25 m / min. The thickness range with which the method allows to work from 3 to 32 mm, and the maximum dimensions of the sheet – 12000mm * 2500mm. Thus, plasma cutting is one of the most common methods of shaped cutting of sheet materials.
Autogenous thermal cutting
It is one of the simplest and least costly options for cutting metal. The method is based on heating the metal to the melting temperature by burning a mixture of oxygen and fuel, and burning the metal when a stream of cutting oxygen is supplied to the cutting zone. It is most often used for cutting “black” steels up to 300 mm thick.
Laser cutting
This method allows to cut ferrous or galvanized metal with a thickness of 0.5mm-5mm and a working table dimension of 2500mm * 1250mm with maximum precision and without additional processing.
